Failure to wear fault chain conveyor chain
Shandong xianjin mining equipment Co., Ltd is a professional production and sales all kinds of chain, chain of good quality, excellent service, welcomed by customers. The following comment fault form of conveyor chain conveyor chain: failure fault chain wear
The wear failure is a form of expression is the most obvious and most common. There are many reasons for this failure, the main reason is the improper chain poor materials and the worker's operation. The whole chain appears the most easily abraded is chain wheel and the pin shaft. The two part wear is mainly due to local lack of lubrication, so in order to avoid the occurrence of this phenomenon, the operator should pay attention to regularly check the lubrication, lubricating oil added in a timely manner, whether there is abrasive or change the lubricating methods to check the oil. Sprocket slightly worn, can be arranged in a reverse sprocket, let wear lighter towards the side chain. In addition, if the use of harsh environment or lubrication sealing side, will cause the hinge wear, once the chain hinge wear, chain variable length, easy to cause the tooth leap or off the chain work, reduce the service life of the chain, the chain failure acceleration.
Failure to wear fault chain conveyor chain 2016-11-21 This article has been read 1864 Secondary
